NEW DAY TIMER PROGRAMMING:

The NEW DAY "Walk Away" Timer is designed to provide the user with the easiest to use daylight timer available. Therefore, there is no programming required. The unit has a fixed program to feed at sunrise and 1 hour before nightfall, with the motor set to run for 6 seconds.

Simply install the 4 D-Cell batteries and "Walk Away". The microprocessor will take over and cause a feeding at the pre-programmed times.

When the batteries are installed/replaced, a learning period of approximately 24 hours will pass before the NEW DAY will start it’s feeding pattern.

MOTOR TEST:
Momentarily press the TEST push button on outside of case. Motor will run following a 10 second delay.