PROGRAMMING FOR HAWKEYE JR>           Back           

Factory Program:
When received, the Hawk-eye Jr. will be programmed for 24 hour activation and a delay between pictures of 12 minutes. That is: DIP Switch 1 & 2 will be turned on and DIP Switch 3 & 4 will be turned off. The PCB and camera power switches will be turned off.

User Programming:
1) Turn off external switch, and open front door of monitor.
2) Turn on PCB power switch.
3) Position DIP switches, below, to satisfy your particular program.

Delay between pictures.   Activation period.
Swt-1 Swt-2 Delay      Swt-3 Swt-4  Period
off      off   3 min.       on      off    Daytime
off      on    6 min.       off     on    Nighttime
on       off   9 min.       off     off    24 hr.
on       on    12 min.      on      on    not used

Programming complete
1) Close front door of monitor.
2) Turn on external switch. As soon as the external switch is turned on the camera will be deactivated for a period of 5 minutes. Thus providing time to clear the area.